Module type optical amplifier (Gain Block)

  • HOME »
  • Module type optical amplifier (Gain Block)

Optical amplifier Gain Blocks are compact in size and suitable for built-in use. FiberLabs provides a wide wavelength range of optical amplifier Gain-Blocks over the O-, S-, C- and L-bands. These Gain Blocks can be used for B-PON system using three wavelengths of 1.31 μm, 1.49 μm, and 1.55 μm (ITU-T [compliant with G.983.3]), DWDM system and 100 GbE (IEEE 802.3ba) using the 1.3 μm band.
index

What is optical amplfier ?

Model Band Signal Wavelength (nm) Size HxWxD (mm) Gain (dB) Noise Figure (dB) Applications
AMP-GB9620-OB-(8 ~ 16) O 1280~1320 125x150x25 8~16*1 <7 Booster-amp
AMP-GB9620-OP-(10 ~ 25) 10~25*2 Pre-amp
AMP-GB9600-OB-(8 ~ 16) 132x190x35 8~16*1 Booster-amp
AMP-GB9600-OP-(10 ~ 25) 10~25*2 Pre-amp
AMP-GB9211-SB-(13, 20) S 1460 ~ 1500 132x190x35 15~20 <7 Booster-amp
GB-HMSA011-CB-(12,13) C 1530 ~ 1560 45x70x12 12,13*3 < 6 Booster-amp
GB-HMSA011-CP-(25,27) 25,27*4 < 5 Pre-amp
GB-FMSA011-CB-(12 ~ 20) 70x90x12 12~20*3 < 6 Booster-amp
GB-FMSA011-CP-(25~33) 25~33*4 < 5 Pre-amp
AMP-GB9011-CB-(10 ~ 20) 90x120x18 10~20*3 < 6 Booster-amp
AMP-GB9013-CP-(10 ~ 40) 10~40*4 < 5 Pre-amp
AMP-GB9001-LB-(16, 19) L 1560 ~ 1610 90x120x29 25~30*5 < 6 Booster-amp

*1 Input signal: >0dBm@1310nm *2 Input signal: -30dBm@1310nm *3 Input signal: >0dBm@1550nm
*4 Input signal: -30dBm@1550nm *5 Input signal: -30dbm@1580nm

Item
Applicable models
 Evaluationboard-I  P/N: AMP-GB9600-Ox-yy, AMP-GB901x-Cx-yy, etc.
 Evaluationboard-II  P/N: AMP-GB9620-Ox-yy, GB-FMSA011-Cx-yy, etc.
Copyright © Fiberlabs Inc All Rights Reserved.
Powered by WordPress & BizVektor Theme by Vektor,Inc. technology.