English
Japanese

 
   

EDFA module: - AMP-GB901x-Cx-yy      -C band-

  External View
  Standard Specifications
Applications Booster Amplifier Pre-Amplifier
Item AMP-GB9011-CB-xx (xx: 10 ~ 20) AMP-GB9013-CP-xx (xx: 10 ~ 40)
Signal Wavelength 1530 ~ 1560 nm
Gain  10 ~ 20 dB *1 10 ~ 40 dB *2
Noise Figure < 6 dB < 5 dB
Amplifier control *3 ACC / ALC
Dimension 90 x 120 x 18  mm *4
Supply voltage DC 5V
Power Consumption < 20 W
Input/Output Fibers SMF
Optical Connector SC, FC / PC, Angled PC
Operating case temperature 0 ~ 40 ēC
Storage case temperature  -10 ~ 60 ēC
*1: input power : > 0 dBm @1550 nm
*3: Select at order
*2: input power : -30 dBm @1550 nm
*4: Not including protrusions
  Functions
  • Monitor function;
          Input / Output power level
          Pump LD temperature, Case temperature,
  • Alarm function;
          Loss of input signal, Output power, Pump LD current,
          Reflection from output connector (Option)
  • Shutdown function;
          External signal (TTL level), Loss of input signal
          Reflection from output connector (Option)
  • RS232 command interface with monitoring and control function (Optional)
  Drawings
  • Standard fiber out and electric connector
    (Unit: mm)
  • The specifications are subject to change.
  • All functions, characteristics and exterior design can be optimized according to customer requirements.
Products / About FiberLabs / Technology / Contact Us

Copyright(C) FiberLabs Inc. All Rights Reserved.