L-Band Optical Fiber Amplifier (EDFA)
The AMP-FL8001-LB Series are optical fiber amplifiers designed to meet the need for L-Band testing of active and passive components. Its superior performance is based on the use of an erbium doped fiber gain module.
Features
  • Saturation output power from 13 to 19 dBm
  • Excellent noise figure
  • Excellent gain flatness
  • Competitively priced
  • Output power & pumping current monitoring
  • ACC / ALC mode operation
AMP-FL8001-LB-13
Applications
  • DWDM, CWDM, Datacom
  • Test & measurement
  • Scientific Applications
Standard Specifications
Item AMP-FL8001-LB-22 AMP-FL8001-LB-19 AMP-FL8001-LB-16 AMP-FL8001-LB-13
Signal Wavelength 1560 ~ 1610nm
Maximum Output Power *1 >+22dBm
( >160mW)		 >+19dBm
( >80mW)		 >+16dBm
( >40mW)		 >+13dBm
( >20mW)

Gain *2

 >35dB >35dB >30dB >25dB

Noise Figure *2

 <6dB
Amplifier control ACC / ALC
Monitor Optical output power, Pumping current
Input/Output Fibers SMF

Optical Connectors

 FC/PC
Operating Temperature 0 ~ 40 °C
Storage Temperature -10 ~ 60 °C
Size (H)x(W)x(D) *3 88 x 336 x 352 mm

88 x 230 x 352 mm
Weight 7 Kg 5 Kg
Power Supply AC 100~240V (50/60Hz)

*1 Input Power: >0dBm@1580nm
*2 Input Power: -30dBm@1580nm
*3 Not Including Protrusions

  • The specifications are subject to change.
  • All functions, characteristics and exterior design can be optimized according to customer requirements, and please feel free to contact FiberLabs sales engineers.
Products / About FiberLabs / R&D / Contact Us
Copyright(C) FiberLabs Inc. All Rights Reserved.